### Use and maintenance of cable inkjet printer

In modern industrial production, cable inkjet printer, as an important member of the identification equipment, plays an indispensable role. It can not only efficiently print the production date, batch number, manufacturer information and other key information on the cable surface, but also effectively improve product traceability and ensure product quality and safety. This article will introduce in detail the use steps and daily maintenance methods of the cable inkjet printer to help users make better use of this equipment and improve production efficiency and product management.

#### The basic composition and working principle of 1. cable inkjet printer

The cable inkjet printer is mainly composed of control system, inkjet module, ink supply system, transmission device and peripheral auxiliary equipment. Its working principle is based on non-contact inkjet technology. The control system sends instructions to the code spraying module to control the nozzle to accurately spray the required characters or patterns on the surface of the fast-moving cable in the form of very small ink droplets. This process requires a high degree of accuracy and stability to ensure that the printing effect is clear and long-lasting.

#### Use steps of 2. cable inkjet printer

1. **Boot preparation * *:

-Check whether the power supply and air source (such as pneumatic inkjet printer) are firmly connected, and whether the voltage and air pressure meet the equipment requirements.

-Confirm that there is no debris inside and around the inkjet printer and keep it clean.

-Preheat the inkjet printer to the set temperature to ensure smooth ink flow.

2. **Parameter Settings * *:

-Through the touch screen or computer software, set the printing content, font size, printing position, printing speed and other parameters.

-Adjust the distance between the spray dock and the cable according to the cable specifications to ensure the quality of spray printing.

3. **Material Import * *:

-Send the cable to be printed into the code spraying area smoothly to ensure smooth cable transmission without jitter.

-Adjust the tension and guide device of the cable to avoid bending or offset of the cable to affect the printing effect.

4. **Start printing * *:

-Click the start button, the inkjet printer starts to work, and the printing effect is monitored in real time.

-Pay attention to observe the printing quality, adjust the parameters in time to optimize the printing effect.

5. * * End homework * *:

-After completing the printing task, close the inkjet printer in time, clean the spray dock and the surrounding area to prevent the ink from drying up and blocking.

-Record equipment operation status and printing effect, provide reference for the next use.

#### Routine Maintenance of 3. Cable Inkjet Printer

1. **Cleaning and maintenance * *:

-Clean the spray dock regularly, use special cleaning agent to remove residual ink and impurities, and keep the nozzle unblocked.

-Clean the ink supply system, check whether the ink tank, filter and other components are clean to prevent ink pollution.

-Keep the outside of the device clean to avoid dust accumulation affecting heat dissipation and electrical component performance.

2. **Check and replace consumables * *:

-Regularly check the remaining amount of consumables such as ink and solvent, and supplement or replace them in time to avoid ink breakage or poor printing effect.

-Pay attention to check the nozzle wear, if necessary, replace the new nozzle to ensure printing accuracy.

3. **Maintenance of electrical and mechanical components * *:

-Regularly check whether the electrical connection is loose, ensure that the grounding is good, and prevent electrical failures.

-Lubricate transmission parts, such as bearings, chains, etc., to reduce wear and extend service life.

-Check whether the fasteners are loose and tighten them in time to ensure that the equipment structure is stable.

4. **Software and Data Management * *:

-Back up the printer control system data regularly to prevent data loss.

-Update the printer software to the latest version for more features and performance optimization.

-Properly manage the printing content template, easy to quickly call and modify.

5. **Troubleshooting and Prevention * *:

-Familiar with equipment operation manual, understand common faults and handling methods, respond quickly and solve faults.

-Regular equipment self-test, such as print head self-test, ink circulation test, etc., to prevent potential problems.

-Establish equipment maintenance files, record the time of each maintenance,

E-mail :
inkjet@china-inkjet.cn

Phone/WeChat:
86-13602517575 

Address:
Shenzhen Office Address: Room 407, Times, No.7, Lane 1, Xinwuyuan, Gushu Community, xixiang street, Bao 'an District, Shenzhen

Address of Huizhou Factory Building: No. 1 201 Factory Building, Liandong U Valley, No. 27 Hexi Road, China-South Korea Huizhou Industrial Park, Zhongkai District, Huizhou City